Audi Cabriolet Forum
manuel zu hydraulisch verdeck teil 1 - Druckversion

+- Audi Cabriolet Forum (https://www.audi-cabrio-club.info/forum)
+-- Forum: Audi Cabriolet (https://www.audi-cabrio-club.info/forum/forumdisplay.php?fid=1)
+--- Forum: Verdecktechnik (https://www.audi-cabrio-club.info/forum/forumdisplay.php?fid=33)
+--- Thema: manuel zu hydraulisch verdeck teil 1 (/showthread.php?tid=13026)

Seiten: 1 2


manuel zu hydraulisch verdeck teil 1 - valjo_s2 - 09.07.2008

hi!

i will write in english and i hope you will understand me.
i have upgrated my cabrio with hydraulich verdeck and i would like to share my experiences with audicabrio comunity there.

well i have to change:
-verdect ECU
-komplet instalation for verdeck, winfows, central locking.....
[Bild: wVO4kLOZHlEQ6S5y.v.jpg]
-hydralic pump, hydraulich elemente and verschluss teile
[Bild: RyNemFh6MrSaQhtR.v.jpg]
-verdeck
[Bild: EvRMZRn06SuSi8ok.v.jpg]

First we have to undo car interior:
[Bild: fvPg92q6KUaKkdx_.v.jpg]
[Bild: R_s5oFy5kchSp6WJ.v.jpg]
[Bild: 1tVoKtnnYiNJe0bl.v.jpg]
[Bild: iUXRsOnduC6mGHWO.v.jpg]


RE: manuel zu hydraulisch verdeck teil 1 - valjo_s2 - 09.07.2008

Then we have to take out old instalation:
[Bild: i3U9NSKdnucyPHPQ.v.jpg]
[Bild: PBdam9tmIFPLakR1.v.jpg]

Old instalation almost out:
[Bild: 7cZ2VCW6CGEBBW9s.v.jpg]

Old instalation finaly out:
[Bild: 2fY_Ad9A7Kdw_Mur.v.jpg]

Working on new instalation:
[Bild: VvGKpO1KoCKyKRYP.v.jpg]
[Bild: PEOyzTqAR9MIwPvv.v.jpg]
[Bild: T8vF8tsOdsDr8oiY.v.jpg]

Verdeck takeon off the car:
[Bild: VeJt_carV9SlbYbK.v.jpg]
[Bild: lotYf_dbuVhKaQeS.v.jpg]

Hydraulic pump fitted:
[Bild: u04StZE8vsqi3XuQ.v.jpg]


RE: manuel zu hydraulisch verdeck teil 1 - valjo_s2 - 09.07.2008

Hydraulich verdeck fitted:
[Bild: G_dvumesbm4MaRU8.v.jpg]
[Bild: STozRLNOaOf5jjEW.v.jpg]
[Bild: vCevx4QVm7BCIwBn.v.jpg]
[Bild: 1xPHja8woOjVgD2n.v.jpg]
[Bild: dHRFYQdA6CMShf_T.v.jpg]

Finishing instalation:
[Bild: 7LvsXYpB2mT8bE_k.v.jpg]
[Bild: MSIjVvJLNjNIoZ76.v.jpg]
[Bild: 1UtCcXvIGFzen45d.v.jpg]
[Bild: 5FWU2w8Fl9OxZyMM.v.jpg]
[Bild: YtHou6FVSNWNQ1LX.v.jpg]

New switch Ganz geschmeidisch...
[Bild: t9Ey0yDouoUUyF1F.v.jpg]

Short movies:
http://www.mojvideo.com/video-of/9144bf805108eeb35a21
http://www.mojvideo.com/video-on/6e71ae9894ed98cf26cf

I and mine frind start working on project on Friday at 19h, at Saturday morning (5h) we first start hydraulich verdeck and it worked in first attemp Cool
Car was completed on Sunday!
There is still some minor things to do but mostly project is over. I must say that hydraulich verdeck is pure plesure Devil


RE: manuel zu hydraulisch verdeck teil 1 - Owe - 09.07.2008

Nice lady on the video! Zwinker


RE: manuel zu hydraulisch verdeck teil 1 - kawa116 - 09.07.2008

Servus,

good job. At the end, to make it perfect and absolutly comfortable, you might have to install the Reinhold-Module.

Compared to the job you´ve allready done, it will be nothing.

And then, the nice lady might stay in front of the car and just looking good. Nix wie weg!


RE: manuel zu hydraulisch verdeck teil 1 - hamag - 09.07.2008

hallo,
die Hormone wieder...;-)

gr. sven


RE: manuel zu hydraulisch verdeck teil 1 - H;o)lli - 09.07.2008

Jungs,

back to topic, pls!

Bitte nur technische Beiträge, spätere Leser sollen sich nicht durch zig OT-Beiträge wühlen müssen, um relevante (Zusatz-)Infos herauszupuhlen, oder gleich aufgeben müssen ("ich hatte keine Lust, mich durch 40 Seiten durchzuwühlen").

Danke für's Verständnis.

Gruss, HZwinkerlli


RE: manuel zu hydraulisch verdeck teil 1 - semu - 11.07.2008

Hi Grega,

really a good work and very interesting to see the effort for converting a manual into an electrical convertible top.
Could you please check the following: In the 2nd video (after 13/14s) a squeaky noise occurred.
I recommend looking for the root cause or at least using some oil.
Please check also carefully if the windows are adjusted properly to the new soft top - otherwise you'll find after the next shower some water inside

Kind regards,
semu


RE: manuel zu hydraulisch verdeck teil 1 - valjo_s2 - 12.07.2008

semu schrieb:Hi Grega,

really a good work and very interesting to see the effort for converting a manual into an electrical convertible top.
Could you please check the following: In the 2nd video (after 13/14s) a squeaky noise occurred.
I recommend looking for the root cause or at least using some oil.
Please check also carefully if the windows are adjusted properly to the new soft top - otherwise you'll find after the next shower some water inside

Kind regards,
semu

hi semu!
thanks for that advices. well i have already tested car for leaks and it is 100% without any leaks, because i had done as you said; adjust the windows Zwinker

i am still working on that squeaky noise...... it only accured when it is hot outside....


best regards
grega


RE: manuel zu hydraulisch verdeck teil 1 - p.hampe - 29.07.2008

Hi I´m Philipp
Nice work!!!
May be u can help me to fix some problems.
I have to do the same thing that u did but i miss a cable from the controll-unit at the backside.u have a pic from that unit but i can´t see 4 conections.
from where is the cable at the verry left side.
i ain´t got non.
And at the front of the car at the central-electric i have 2 conections left.
1x Green 1x Grey both oh them have 4 pins .and my windows dosen´t work with the central knobe at the middle console.
Help me. Ja Massa