FAQ
02.03.2009, 01:00
Hallo Micha,
Thanks for asking.
Nothing new really except for that now nothing is happening at all when the hood is in open position under the boot lid. just a click and then the roof lamp is flashing. But when I open the roof everthing is working as in the Video. A few times the roof lid is staying up and the roof is going down halfway into the roof and after that nada.
I have ordered parts from FOBA and will hopefully recieve them by post tomorrow. If so I will install brand new cables tomorrow and check If that curred anything.
Yes I did clear the defect code memory and after that I don't get any faulthy codes except for that the power windows is not raising from lower position when using middle dash panel button.
I have not changed anything as I get different codes depending on what stage I am in with VAG-COM. Howerever I checked with VAG-COM manually and the schalters in right and left locks are working as expected when pushing them, but I am not quite sure that the left hand side is working as it should when I maneuver the roof. It's sluggish and kindy of messy so I will clean it up and put lubricant to get it smoother.
I will do a resume after I've replaced the cables and checked if that was the problem and attach a complete VAG-COM log/listing of the individual in and outs.
Thanks for asking.
Nothing new really except for that now nothing is happening at all when the hood is in open position under the boot lid. just a click and then the roof lamp is flashing. But when I open the roof everthing is working as in the Video. A few times the roof lid is staying up and the roof is going down halfway into the roof and after that nada.
I have ordered parts from FOBA and will hopefully recieve them by post tomorrow. If so I will install brand new cables tomorrow and check If that curred anything.
Yes I did clear the defect code memory and after that I don't get any faulthy codes except for that the power windows is not raising from lower position when using middle dash panel button.
I have not changed anything as I get different codes depending on what stage I am in with VAG-COM. Howerever I checked with VAG-COM manually and the schalters in right and left locks are working as expected when pushing them, but I am not quite sure that the left hand side is working as it should when I maneuver the roof. It's sluggish and kindy of messy so I will clean it up and put lubricant to get it smoother.
I will do a resume after I've replaced the cables and checked if that was the problem and attach a complete VAG-COM log/listing of the individual in and outs.
