02.03.2009, 23:55
Guten Abend alles!
Ich muss leider in Englisch screibe.
I found out something strange with the cables on the left hand side in the boot lid.
I disconnected the adapters to replace the old cable with a new more flexible cable. And I found this:
![[Bild: cable_left.jpg]](http://audiomedia.se/cab/bootlid/cable_left.jpg)
As you all can see the yellow/white cord is cut and not actually connected to the adapter. There are a total of four cords from the boot lid going into the adapter. As the adapter has a lock there is no way for the pins to move out and there are no 5th pin in the adapter.
Could somebody please verify if this is the way it should be? Personally I doubt it.
It looks like it is the original Gebaur & Griller cable as it has a sticker on it labeled:
8G0 971 726
c41
01.10.93
FGD
SASAD /UNGARN
AU 1 Y006 1 25
04/94
23409
001
And last hadwritten 598
On the other side of the adapter it looks like this:
![[Bild: adapter_chassi.jpg]](http://audiomedia.se/cab/bootlid/adapter_chassi.jpg)
As you can see the other adapter have five cords so why not five on the loose end?
Could somebody please verify if the yellow/white cord is connected to the adapter or not? Is there a electric schema?
Could this be the reason why my roof top does not work to 100%?
Ich muss leider in Englisch screibe.
I found out something strange with the cables on the left hand side in the boot lid.
I disconnected the adapters to replace the old cable with a new more flexible cable. And I found this:
![[Bild: cable_left.jpg]](http://audiomedia.se/cab/bootlid/cable_left.jpg)
As you all can see the yellow/white cord is cut and not actually connected to the adapter. There are a total of four cords from the boot lid going into the adapter. As the adapter has a lock there is no way for the pins to move out and there are no 5th pin in the adapter.
Could somebody please verify if this is the way it should be? Personally I doubt it.
It looks like it is the original Gebaur & Griller cable as it has a sticker on it labeled:
8G0 971 726
c41
01.10.93
FGD
SASAD /UNGARN
AU 1 Y006 1 25
04/94
23409
001
And last hadwritten 598
On the other side of the adapter it looks like this:
![[Bild: adapter_chassi.jpg]](http://audiomedia.se/cab/bootlid/adapter_chassi.jpg)
As you can see the other adapter have five cords so why not five on the loose end?
Could somebody please verify if the yellow/white cord is connected to the adapter or not? Is there a electric schema?
Could this be the reason why my roof top does not work to 100%?