FAQ
14.02.2008, 23:57
danke für did Antworte 
,
I could not solder them and you are right, this is very important. I had to do all the connections by hand in both sides of every wire, following the intructions I saw in a picture of you about changing the cables, isolating each connection. Once I had all the wires connected I isolated all of them together.
First I did the right cable checking every wire carefully and tried to open the soft top lid.. After the first trying, I did the left cable in the same way.
Tomorrow I will disconnect all the wires and will try again putting some more attention to the "process". I will try to solder them if possible.
The soft top lid (verdeckkasten) starts to go up and suddenly stops (I said 5 cms but could be some more, 7 or 8) and you can listen to a soft "clack", like if both sides and trying to go up and they keep stuck, while the motor continues sounding.
Anyway, I will record a small video tomorrow with daylight and you can see the opening process.
Of course I won´t stop until all is solved
.
Before this problem I had a few ones and I did myself, like changing the thermostat (very hidden in this car, I sweated like a pig), temperature sender, ventilator connections and switches, some fuses, cd and cd box replacement with new connections, expansion tank, a cable broken in the driver window that solved buying a new motor in a second hand car´s etc... .). I think the car has some electrical problems cos of somebody cleaned the motor by pressure washing and we all know what that means... problems that last for a long time.
Keep inform about everything. Thank you for help. I go now to have a nice beer and listen to a nice live music band just down home.
Bis bald y tened un buen día mañana
.
,I could not solder them and you are right, this is very important. I had to do all the connections by hand in both sides of every wire, following the intructions I saw in a picture of you about changing the cables, isolating each connection. Once I had all the wires connected I isolated all of them together.
First I did the right cable checking every wire carefully and tried to open the soft top lid.. After the first trying, I did the left cable in the same way.
Tomorrow I will disconnect all the wires and will try again putting some more attention to the "process". I will try to solder them if possible.
The soft top lid (verdeckkasten) starts to go up and suddenly stops (I said 5 cms but could be some more, 7 or 8) and you can listen to a soft "clack", like if both sides and trying to go up and they keep stuck, while the motor continues sounding.
Anyway, I will record a small video tomorrow with daylight and you can see the opening process.
Of course I won´t stop until all is solved
.Before this problem I had a few ones and I did myself, like changing the thermostat (very hidden in this car, I sweated like a pig), temperature sender, ventilator connections and switches, some fuses, cd and cd box replacement with new connections, expansion tank, a cable broken in the driver window that solved buying a new motor in a second hand car´s etc... .). I think the car has some electrical problems cos of somebody cleaned the motor by pressure washing and we all know what that means... problems that last for a long time.
Keep inform about everything. Thank you for help. I go now to have a nice beer and listen to a nice live music band just down home.
Bis bald y tened un buen día mañana
.
