FAQ
24.04.2023, 16:03
Hi Lucian,
I would recommend to ask the Osnabrück Cabrio centre for an installation instruction in English; they should have it. Another hint if you intend to replace the soft top: You can expect rust on the frame where it was in touch with the canvas, further I remember there is some soft material on the front and rear frames with rust underneath. After removal of the skin I carefully covered the cockpit with blankets, cleaned the frame and grinded the rust (in the other hand a vac cleaner). I painted the grinded spots on the beams with black 'Brantho-Korrux 3in1' (for example) using a brush, because the frame will most likely not be seen again.
Cheerio - Christoph
I would recommend to ask the Osnabrück Cabrio centre for an installation instruction in English; they should have it. Another hint if you intend to replace the soft top: You can expect rust on the frame where it was in touch with the canvas, further I remember there is some soft material on the front and rear frames with rust underneath. After removal of the skin I carefully covered the cockpit with blankets, cleaned the frame and grinded the rust (in the other hand a vac cleaner). I painted the grinded spots on the beams with black 'Brantho-Korrux 3in1' (for example) using a brush, because the frame will most likely not be seen again.
Cheerio - Christoph